Leica Elmar 5cm f/3.5 Disassembly, Part 2 – Cleaning Haze off the Rear Glass

Leica Elmar 5cm f/3.5 Disassembly, Part 2 – Cleaning Haze off the Rear Glass CAMERA Maintenance

This is the second disassembly post for this Leica Elmar 5cm f/3.5, a small standard lens for Leica screw-mount (L39) cameras. In part 1, I opened the front of the lens and cleaned the second glass element. About two weeks later, on December 1, 2024, I opened it again, this time from the back. The glass at the rear had haze and dirt on it.

The Leica Elmar 5cm f/3.5 seen from the front, engraved Leitz Elmar f=5cm 1:3,5, with Feet and Germany on the mount
The same Elmar as in part 1: “Leitz Elmar f=5cm 1:3,5”, “Feet” and “Germany”

1. Working from the back

The end of the tube at the back of the lens has notches cut into it. A flat metal tool fits across two of them.

The back of the Elmar, with a flat metal tool laid across two notches at the end of the tube
A flat tool across the notches at the back of the tube
The Elmar held from the side, with the tube pulled out and a dark sleeve at its end
The lens from the side, with the tube pulled out

2. A thin, dark sleeve

At the end of the tube sits a thin, dark sleeve. I worked it off with the same flat tool.

The flat tool inside the dark sleeve at the end of the tube
The tool inside the sleeve
The flat tool easing the dark sleeve along the silver tube
Easing the sleeve along
The dark sleeve off the silver tube, held in the other hand
The sleeve off the tube

I brushed the sleeve and wiped the inside of the tube with a tissue. By this point you can see black marks on my fingers.

A brush with a gold-colored ferrule against the dark sleeve
Brushing the sleeve
Wiping the inside end of the tube with a tissue
Wiping the inside of the tube

3. Reaching the rear glass

Looking into the back of the lens, the glass sits behind a ring with slots in it. I turned it with a lens spanner, a tool with two points that fit the slots.

A lens spanner reaching into the back of the Elmar
The lens spanner inside the back of the lens

I also used a bamboo stick here.

A bamboo stick at the edge of the glass inside the back of the lens
A bamboo stick inside the back

With a black ring out, a brass ring and the rear glass in its holder came out next.

A thin black ring held up in front of the back of the lens
The black ring out
A brass ring and a black threaded glass holder coming out of the back of the lens
The brass ring and the glass holder coming out

4. The rear glass

Here is the reason I opened the lens. Held up to the light, the rear glass shows haze and dirt across the surface.

The rear glass in its black holder, held between fingers, with haze and dirt visible on the surface
Haze and dirt on the rear glass

This visit was all cleaning work. I cleaned the glass and put the lens back together.

5. After

In November 2025, the lens went to a new owner in the United States. If you missed the first part of the work, part 1 is here.

Thank you very much for reading.

Follow azuleterno on Instagram

I run azuleterno, a shop in Japan that sends good-quality used Japanese cameras and lenses to people all over the world. Like the lens in this post, items with minor problems are repaired and put in order before they are sold.

On Instagram I post the lenses and cameras I have just listed. Follow along to see what comes in next.

Questions, or looking for a particular lens or camera? Send me a DM on Instagram. Requests are welcome.

Shop worldwide on eBay

We sell good-quality items from Japan to buyers all around the world, and eBay is where we do it. Our items are listed in our eBay shop with detailed photos and an honest description of their condition, and we ship from Japan to your door.

When you find something you like on Instagram, this is the place to see it in full and buy it.

“For Your Happier Life, For the Future of Our Earth.” Giving well-made cameras a longer life is our small way of caring for the planet.


日本語

ライカ エルマー 5cm F3.5(ライカのスクリューマウント L39 用の小さな標準レンズ)の分解の記録、その2です。その1では、レンズの前側を開けて、前から2枚目のガラスを清掃しました。その約2週間後の2024年12月1日、今度は後ろ側から開けました。後ろのガラスに曇りと汚れがあったためです。

1. 後ろ側から作業する

レンズの後ろの筒の端には切り欠きがあり、平たい金属の道具を2つの切り欠きに渡してかけられます。

2. 薄い黒っぽい筒

筒の端には、薄い黒っぽい筒がはまっています。同じ平たい道具で少しずつ外しました。

外した筒にブラシをかけ、筒の内側をティッシュで拭きました。この時点で、指に黒い汚れが付いているのが見えます。

3. 後ろのガラスまで届く

後ろから覗くと、ガラスは溝の付いた環の奥にあります。溝に2つの先端をかける道具(カニ目レンチ)で回しました。

ここでは竹串も使いました。

黒い環を外すと、次に真鍮の環と、枠に入った後ろのガラスが出てきました。

4. 後ろのガラス

今回開けた理由がこれです。光にかざすと、後ろのガラスの表面に曇りと汚れが広がっています。

今回の作業は、全体を通して清掃です。ガラスを清掃して、レンズを組み直しました。

5. その後

2025年11月、このレンズはアメリカの新しい持ち主のもとへ渡りました。作業の前半はその1をご覧ください。

最後まで読んでいただき、ありがとうございました。

オールドレンズの分解清掃を承ります|Repair Factory Fuji Base

この記事のような分解清掃を、国内のお客さまのレンズでもお受けしています。静岡県富士市の工房で、カビ・くもり・絞りの油染み・バルサム切れの清掃を、1本ずつ作業します。

基本料金2,000円(税込価格2,200円)・返送料込み。料金表とお申し込みは、受付ページをご覧ください。

作業の様子は、Instagram @fujibase_repair でも紹介しています。

InstagramでazuleternoをFollowしてください

日本の良質な中古カメラ・レンズを、世界中の方へお届けしているショップ azuleterno を運営しています。今回のレンズのように、小さな不具合のある品は修理・整備してから販売しています。

Instagramでは、新しく出品したレンズやカメラを紹介しています。フォローしていただくと、次に入ってくる品が見られます。

ご質問や、お探しのレンズ・カメラがあれば、InstagramのDMでお気軽にどうぞ。

モットーは “For Your Happier Life, For the Future of Our Earth.”(あなたのより幸せな暮らしと、地球の未来のために)。良いカメラを長く使い続けてもらうことが、地球を大切にする私たちなりの方法です。

Comments

Copied title and URL